As for the development of new projects, have you encountered any of these difficulties when choosing electronic connector products?
Only knowing the pitch but not knowing structure or there is only a general connection mode, current requirements, etc., and not knowing the specific model required, all of those will reduce the efficiency of selection
Although there are many manufacturers of electronic connectors and their products have detailed specifications and parameters, it is still difficult to provide suitable products for predetermined circuits or systems.Therefore, it is necessary to obtain the content of the following electronic connector products
Connection: The first step in selecting an electronic connector may be to define the purpose of the connector product, such as board to board, wire to board, wire to wire (null), etc.
Electrical performance requirements: The current required for a connector will tend to control many overall characteristics. Low-current connectors are usually different from the connector process required to carry high current. The current required for a connector is one of the important elements in selecting a connector.If high current levels are envisaged, then certain types of connectors will be appropriate, and these tend to be larger in size, and more sophisticated connectors can be used if low current levels are required.
Space and structure requirements: the available shape and space of the connector also depends on the overall product design scheme structure, connector spacing size, size and height will be affected.
Environmental requirements: Environmental requirements can play an important role in selecting any connector. Many connectors are suitable only for good environments, while others may need to meet temperature, humidity, vibration, corrosion resistance, etc.
Operating under conditions: Operating under certain special conditions of equipment, as well as the need for long-term sealing and watertight connectors to reduce moisture entry and meet waterproofing standards, all of those need to be considered asone part of the selection decision process
Post time: Jul-14-2020
